Gasketed plate heat exchangers are composed of individually stamped heat transfer plates with gaskets around every plates. The stacked plates are assembled and clamped together with tightening bolts, into a single frame. Nexson Group offers many sizes, which allows variation in the number of plates and different stamp designs to cover all capacity ranges. Our units are designed to have higher efficiency with lower operating costs.
Greenplate™ are suitable for the widest variety of applications (Chemical, Oil&Gas, Agro industries, Heavy industries, Renewable energy, HVAC …)
COMPACT SIZE AND ROBUSTNESS
Nexson gasketed plate heat exchangers reduces significantly installation, operation and maintenance costs.
LOW MAINTENANCE COSTS
Our heat exchangers are designed to maximize the heat transfer surface. They can be set up vertically or horizontally with no need for complex installations.
FLEXIBLE DESIGN
Possibility to add plates on the frame to increase capacity.
CORRUGATED PLATES
Our corrugated plates induce a high turbulent flow that makes the thermal efficiency higher than a traditional shell & tube heat exchanger.
CLOSE TEMPERATURE APPROACH
Thanks to the corrugated plates, combined with high K value, you can reach a very close temperature approach and even get a crossing temperature.
STANDARD OR CUSTOMIZED
Nexson plate heat exchangers are standard models. The standard range gives you the opportunity to discover our products at a very limited cost and with a short delivery time.
EASY ACCESS FOR INSPECTION AND CLEANING
This system allows an easy access in case of inspection, or eventual cleaning on both circuits. In one or multipass, you have access to all the plates by loosening the unit and moving the plates away from each other.
SANITARY DESIGN
Full inox frame from sanitary area where carbon steel have to be avoided.
